MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back
Features
  • 10.00” (250mm) chuck diameter
  • 3 jaw and 2 jaw models
  • QC precision change jaw system
  • Standard and long stroke models
  • 2.60” (66mm) through hole
  • Precision fit master jaws to minimize jaw lift
  • Hardened chuck body, actuators, and masterjaws, for long term accuracy and performance
Repeating Accuracy
  • .0002” (0.005mm) TIR
Unit of Measure

Specifications

Item No.

 14 510 036
Accuracy1 .0002 in0.005 mm

No. of Jaws

 3

Through Hole

 2.600 in66 mm
Jaw Stroke2 .250 in6.3 mm

Actuator Stroke

 .710 in18.0 mm

Max. Draw Tube Force

 31.6 lbs7,100 kN

Min. Draw Tube Force

 600 lbf2.7 kN
Max. Clamp Force3 16,330 lbs72.6 kN
Max. Speed4 3,500 rpm
Chuck Weight5 74.2 lb33.7 kg
Moment of Inertia6 7.03 lb-ft²0.30 kg-m²

Standard Equipment

N/A

  • Blank draw tube adapter
  • Blank top jaws, chuck lubricant, and grease guns are sold separately.

    • Threaded Draw Tube Adapters & Spindle Mounting Plates

    N/A

  • Threaded draw tube adapters are furnished on request
  • A2-6, A2-8 as well as other spindle mounting plates are available on request.

    • 1 Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force.
    • 2 Total jaw stroke.
    • 3 Total clamping force.
    • 4 Maximum speed with standard top jaw at max draw tube force.
    • 5 Without top jaws and spindle mounting plate.
    • 6 Without top jaws and spindle mounting plate.