MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back
Features
  • 4.33” (110mm) chuck diameter
  • 3 jaw and 2 jaw models
  • QC precision change jaw system and dowel pinlocated models
  • Standard and long stroke models
  • 1.063” (27mm) through hole
  • Precision fit master jaws to minimize jaw lift
  • Hardened chuck body, actuators, and masterjaws, for long term accuracy and performance
Repeating Accuracy
  • .0001” (0.0025mm) TIR
Unit of Measure

Specifications

Accuracy1 .0001 in.0025 mm

No. of Jaws

 2

Through Hole

 1.063 in27 mm
Jaw Stroke2 .120 in3.0 mm

Actuator Stroke

 .340 in8.6 mm

Min. Draw Tube Force

 250 lbf1.1 kN
Max. Clamp Force3 3,065 lbs13.6 kN
Max. Speed4 6,000 rpm
Chuck Weight5 7.0 lb3.2 kg
Moment of Inertia6 .13 lb-ft²0.005 kg-m²

Item No.

 14 504 041

Standard Equipment

N/A

  • Blank draw tube adapter
  • Blank top jaws, chuck lubricant, and grease guns are sold separately.

Threaded Draw Tube Adapters & Spindle Mounting Plates

N/A

  • Threaded draw tube adapters are furnished on request
  • Various flat, threaded, and tapered nose spindle mounting plates are available on request.
  • 1 Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force.
  • 2 Total jaw stroke.
  • 3 Total clamping force.
  • 4 Maximum speed with standard top jaw at max draw tube force.
  • 5 Without top jaws and spindle mounting plate.
  • 6 Without top jaws and spindle mounting plate.