MicroCentric Corp
MicroCentric Corp
USA Headquarter:
25 South Terminal Drive
Plainview, NY 11803
Phone: 800.573.1139 - 516.349.7220
Fax: 516.349.9354
E-mail: sales@microcentric.com
Print Back
Design
Self-contained design with built-in air cylinder. Air ports are located on the side of the chuck body for stationary use.

Application
OD and ID chucking for milling, drilling, inspection, or any other non- rotating application requiring high concentricity and/or close workpiece roundness. The inherent spring characteristic of the diaphragm allows workpieces to be clamped without continuous air supply for pallet and tombstone applications.
Unit of Measure

Specifications

Chuck Size

 N/A 3.19 in80 mm

Repeating Accuracy

 N/A .0001 in.0025 mm

No. of Jaws

 N/A 6
Jaw Stroke1 N/A .063 in1.5 mm

Max. Jaw Force

 N/A 510 lbf232 kgf

Max. Air Pressure

 N/A 100 psi7.1 kg/cm²
Weight2 N/A 3.3 lb1.5 kg

A Dimension

 N/A 3.19 in81 mm

B Dimension

 N/A 2.000 in50.8 mm

E Dimension

 N/A .060 in1.5 mm

F Dimension

 N/A 1.77 in44.9 mm

G Dimension

 N/A 3.50 in88.9 mm

H Dimension

 N/A 2.750 in69.8 mm

J Dimension

 N/A M5

Item No.

 N/A 41 080 020

Ordering Information

 N/A MMR Diaphragms, AAS Part Stop Spiders and SMR Blank Top Jaws are not included Diaphram Chucks but are standard equipment.

Standard Equipment

Available Standard Equipment

 N/A AAS Part Stop Spider
ASS-80, AAS Part Stop Spider
MMR Diaphragms
MMR-80-6, MMR Diaphragms
SMR Blank Top Jaws
SMR-80-25S, SMR Blank Top Jaws
SMR Blank Top Jaws
SMR-80-38S, SMR Blank Top Jaws
  • 1 Jaw stroke on diameter with 1.50" high top jaws
  • 2 Without top jaws