Collet & Chuck Features
- 5W wide opening collets are designed to grip over the shoulder of headed parts
- Collets open up to .394" (10mm) above the nominal clamping diameter
- Six segmented double angle design collet with ID thread for mounting part stops or ejectors
- Dead length chuck design
- Chuck components are hardened alloy steel precision ground for accuracy and long term performance
- Internal components are sealed to prevent chip accumulation inside chuck body
- Modular chuck design can be adapted toany machine spindle and draw tube configuration.
- Call for spindle mountings not listed
Unit of Measure
Collet Model |
N/A 5W |
Spindle Nose |
N/A 140mm |
Max. Speed |
N/A 6,000 rpm |
Through Capacity |
N/A 1.062 in27 mm |
Linear Chuck Stroke |
N/A .370 in9.4 mm |
Chuck Weight |
N/A 14.6 lb6.5 kg |
A Dimension |
N/A 1.875 in47.6 mm |
B Dimension |
N/A 3.375 in85.7 mm |
C Dimension |
N/A 4.330 in110 mm |
D Dimension |
N/A 5.250 in133.4 mm |
E Dimension |
N/A 6.120 in155.4 mm |
F Dimension |
N/A 5.182 in131.6 mm |
G Dimension |
N/A 0.938 in23.8 mm |
Item No. |
N/A 35 100 057 |
