Design
Self-contained design with built-in air cylinder. Air ports are located on the side of the chuck body for stationary use.

Application
OD and ID chucking for milling, drilling, inspection, or any other non- rotating application requiring high concentricity and/or close workpiece roundness. The inherent spring characteristic of the diaphragm allows workpieces to be clamped without continuous air supply for pallet and tombstone applications.
Unit of Measure

Chuck Size

4.02 in102 mm

Repeating Accuracy

.0001 in.0025 mm

No. of Jaws

6
Jaw Stroke1 .060 in1.5 mm

Max. Jaw Force

1,560 lbf709 kgf

Max. Air Pressure

100 psi7.1 kg/cm²
Weight2 6.5 lb3.0 kg

A Dimension

4.02 in102.1 mm

B Dimension

3.249 in82.5 mm

E Dimension

.060 in1.5 mm

F Dimension

2.21 in56.1 mm

G Dimension

4.33 in110 mm

H Dimension

3.500 in88.9 mm

J Dimension

M5

Item No.

41 100 017

Ordering Information

MMR Diaphragms, AAS Part Stop Spiders and SMR Blank Top Jaws are not included Diaphram Chucks but are standard equipment.
  • 1 Jaw stroke on diameter with 1.50" high top jaws
  • 2 Without top jaws