Features
  • 8.25” (210mm) chuck diameter
  • 3 jaw and 2 jaw models
  • QC precision change jaw system
  • Standard and long stroke models
  • 2.050” (52mm) through hole
  • Precision fit master jaws to minimize jaw lift
  • Hardened chuck body, actuators, and master jaws, for long term accuracy and performance
Repeating Accuracy
  • .0001” (0.0025mm) TIR
Request Information
Unit of Measure
Items
PPC210DQC-model

PPC210D Precision Power Chuck Models
PPC210DQC-model

PPC210D Precision Power Chuck Models
PPC210DQC-model

PPC210D Precision Power Chuck Models
PPC210DQC-model

PPC210D Precision Power Chuck Models
Accuracy1 N/A .0001 in0.0025 mm
No. of Jaws N/A 3 N/A 2 N/A 3 N/A 2
Through Hole N/A 2.050 in52 mm
Jaw Stroke2 N/A .220 in5.6 mm N/A .220 in5.6 mm N/A .334 in8.5 mm N/A .334 in8.5 mm
Actuator Stroke N/A .630 in16.0 mm
Max. Draw Tube Force N/A 5,840 lbs26.0 kN N/A 3,890 lbs17.3 kN N/A 5,840 lbs26.0 kN N/A 3,890 lbs17.3 kN
Min. Draw Tube Force N/A 500 lbf2.2 kN
Max. Clamp Force3 N/A 13,430 lbs59.7 kN N/A 8,950 lbs39.8 kN N/A 10,510 lbs46.8 kN N/A 7,000 lbs31.1 kN
Max. Speed4 N/A 4,500 rpm N/A 4,500 rpm N/A 3,500 rpm N/A 3,500 rpm
Chuck Weight5 N/A 44.3 lb20.1 kg
Moment of Inertia6 N/A 2.87 lb-ft²0.12 kg-m²
Item No. N/A 14 508 034 N/A 14 508 042 N/A N/A
  • 1 Accuracy is the total indicator reading (radial and lateral runout) of a master gage measured 1.00” (25.4mm) from the top face of the standard top jaw at 1/2 max draw tube force.
  • 2 Total jaw stroke.
  • 3 Total clamping force.
  • 4 Maximum speed with standard top jaw at max draw tube force.
  • 5 Without top jaws and spindle mounting plate.
  • 6 Without top jaws and spindle mounting plate.